SR1P2-A2

3/4-16 UNF • Qmax 1.5 lt/dak (0.40 GPM) • pmax 350 bar (5100 PSI)

• Pressure in the circuit increases proportional to increasing electric command signal
• Low hysteresis and accurate pressure control
• Wide pressure range up to 350 bar
• Pilot valve for valves SR4P2-B2 and SP4P2-B3 or a direct acting valve for small flow up to 1,5 l/min
• Optional electrical terminal of solenoid: EN 175301-803-A, AMP Junior Timer or Deutsch DT04-2P
• Coil supply voltage 12 or 24 V DC
• In the standard version, the valve is zinc-coated for 240 h protection acc. to ISO 9227. Enhanced surface protection for mobile sector available for the steel parts (ISO 9227, 520 h salt spray)