SD2E2X-B4

7/8-14 UNF • Q_max 50 l/min (13 GPM) • p_max 350 bar (5100 PSI)

• 4/2-screw-in cartridge directional control valve, spool type, with 7/8-14 UNF connection thread
• Maximum operating pressure 350 bar
• Certification of solenoid coil ATEX (Directive 2014/34/EU) and IECEx, valid for mines and environments with potentially explosive atmospheres consisting of gases or dust
• Coil certification “FM APPROVED” valid for USA and Canada
• Coil protection by flameproof enclosure “d” / “t” (for dust)
• Robust design resistant to mechanical damage
• Protection against static discharge by grounding the valve surface
• Valves applicable for temperature classes T4 (135 °C), T5 (100 °C) and T6 (85 °C) depending on maximum ambient temperature
• Easily interchangeable direction of power cable entry (axial/radial) into the coil
• Optional coil supply voltage, valve connection and type of manual override
• The valve is zinc coated for 520 h corrosion protection in NSS acc. to ISO 9227 and as protection against ignition spark in the event of mechanical impact