4/2 and 4/3 Directional Control Valve, Solenoid Operated
RPE4-10
Size 10 (D05) • Qmax 140 l/min (37 GPM) • pmax 350 bar (5100 PSI)
- Direct acting directional control valve with subplate mounting interface acc. to ISO 4401, DIN 24340 (CETOP 05)
- High transmitted hydraulic power up to 350 bar with optimized design to minimize pressure drop
- Five chamber housing design with reduced hydraulic power dependence on fluid viscosity
- The valve is available with interchangeable DC solenoids, also for AC power supply using a built-in rectifier bridge
- Wide range of solenoid electrical terminal versions available
- Wide range of interchangeable spools and manual overrides available
- CSA Certificate upon request
- Inductive contactless Normally Open and Normally Closed spool position sensor option
- Soft-shift spool speed control option
- The coil is fastened to the core tube with a retaining nut and can be rotated by 360° to suit the available space
- In the standard version, the valve housing is phosphated for basic surface corrosion protection and as preparation for painting. Steel parts are zinc-coated for 240 h salt spray protection acc. to ISO 9227
- Enhanced surface protection for mobile sector available for the valve housing and steel parts (ISO 9227, 520 h salt spray)
Specificazioni
- Tipo
- Potenza motore
- Q max. l/min
- P max. bar
- Foglio
- Scarica
-
Tipo
-
Potenza motore0.00
-
Q max. l/min140 (37)
-
P max. bar350 (5076)
-
FoglioHA 4039
-
Scarica