OPS 010

Some of the causes of water in hydraulic and lubricating oil are:
Ambient moisture, splash water, cooler breakage.

With the new OPS mobile dewatering unit large quantities of
free water can be removed economically. The oil is heated and
channelled into a vacuum chamber.

The water is reduced quickly, long before the saturation limit is
reached, thanks to the reduced steam pressure.
A fine filter is installed downstream from the drying process to
ensure that the oil is dry and filtered when it flows back into the
machine or tank.

Water content is constantly monitored with the ARGO-HYTOS
LubCos H₂O water sensor. Thus the user is always up to date.
Thanks to the available combinations of the device, the OPS is
always perfectly equipped.