In the world of hydraulics, overcenter valves provide precise control and regulation of loads. They provide three essential functions in one component: check valve, pressure relief and cavitation protection. This combination enables efficient, safe and powerful handling of hydraulic systems.

Overcenter valves act as check valves by controlling the oil flow of hydraulic actuators. In this way, they ensure smooth, jerk-free movement and safe holding of loads. The integrated pressure relief function protects the actuator from overload and pressure spikes, ensuring long service life and optimum performance.

In addition, these valves have an integrated check valve. It serves as cavitation protection and thus increases the stability and efficiency of the hydraulic system.

In this article, we take a closer look at the overcenter valve, its functions and areas of application. We also provide practical tips on the correct use of the valves.

How do overcenter valves work?

Overcenter valves are critical for precise, reliable control of pulling or negative loads that must be lowered in a controlled manner.

The main function of an overcenter valve is to throttle the movement of cylinders or motors applied to the first port. Another port is connected to a return line or a tank, for example. The valve opening is controlled by a load pressure at the first port and a pilot pressure at the third port.

The load pressure displaces the spool and the inner sleeve against the main spring until the spool reaches a stop. In this position, the load pressure acts on a small annular surface so that the inner sleeve is pressed against the main spring.

The spool and sleeve separate, with the movement of the inner sleeve being assisted by the control pressure. The control pressure acts on a larger ring area. The ratio of these two ring areas is known as the open-loop control ratio.

The advantages of overcenter valves lie in their ability to lower pulling loads in a controlled manner. During operation, a pressure is generated in the supply and additionally also a load pressure. The load pressure causes the overcenter valve to open and the actuator to move at the required speed.

Key features of overcenter valves

• Main function: Throttling the movement of cylinders or motors for controlled lowering of pulling loads.
• Three connections: Connection to cylinders, return/tank and control system
• Control and load pressure: regulation of valve opening by load and control pressure
• Open-loop ratio: optimization of precise control by the ratio of the annular areas on which load and control pressure act

Three functions in one valve

An overcenter valve combines three essential functions in a single component. The three main functions of the valves are:

1. use as a check valve: a check valve is a critical element in hydraulic systems. This is because it allows oil flow in one direction and blocks it in the opposite direction. This ensures that the load is held in position when no movement is required. It also prevents the load from sinking or slipping undesirably. This function enables stable and safe working with loads in hydraulic applications.

2. pressure relief function: The pressure relief function protects the actuator from overload and pressure peaks. This function ensures that the permissible pressure is not exceeded on the secondary side in the hydraulic system. When the pressure reaches a predefined limit, the valve is opened. It then releases the excess pressure, protecting the system components from damage. This feature increases the life of the actuators and ensures safe operation.

3. integrated check valve: The integrated check valve serves as cavitation protection and bypass. Cavitation is a phenomenon in which vapor bubbles form and collapse in a fluid. This can cause severe erosion of material surfaces. The check valve prevents fluids from flowing in the wrong direction, causing cavitation. This protection contributes to the longevity and reliability of the entire hydraulic system.

Efficient check and overcenter valves for optimum system performance

ARGO-HYTOS overcentre valves prevent consumers from running ahead of the supply flow. They ensure safe holding in any position during system standstill. Our valves are available in various designs.

SO5A-BP3

The SO5A-BP3 overcenter valve prevents consumers from running ahead of the supply flow. It provides safe holding in any position during system standstill. It also has a pressure relief function that protects the actuator from overloads and pressure spikes, and an integrated check valve for cavitation protection.

SO5A-CP3

The SO5A-CP3 overcenter valve provides a pressure relief function to protect the actuator from overload and pressure spikes, as well as an integrated check valve for cavitation protection.

SOB5A-BP3 - pressure compensated

The fully balanced and atmospherically vented SOB5A-BP3 overcenter valve protects the actuator against overload and pressure peaks independent of dynamic pressure. At the same time, the built-in check valve serves as cavitation protection. The standard version of the valve is galvanized, with surface protection according to ISO 9227.

SOB5A-CP3 - pressure compensated

The fully balanced and atmospherically vented SOB5A-CP3 overcenter valve prevents consumers from running ahead of the supply flow. It enables safe holding in any position during system standstill. With integrated check and pressure relief functions, it protects against cavitation and preserves the system from overload and pressure peaks. Maximum flow rate is 80 l/min (21 GPM), and maximum operating pressure is 350 bar (5100 PSI).

SOBD5A-BPY3 – pressure compensated, external leakage oil connection

The SOBD5A-BPY3 fully balanced overcenter valve protects against cavitation with integrated check and pressure relief functions and preserves the system from overload and pressure spikes. The maximum flow rate is 40 l/min (11 GPM) and the maximum operating pressure is 420 bar (6100 PSI).

SOBD5A-CPY3 – pressure compensated, external leakage oil connection

The SOBD5A-CPY3 fully balanced overcenter valve can be used installed in an actuator as a hose rupture valve. It protects the system from overload and pressure spikes by integrated check and pressure relief functions. The maximum flow rate is 80 l/min (21 GPM) and the maximum operating pressure is 350 bar (5100 PSI).

Practical tips for the efficient use of overcenter valves

Do you want to get the most out of your valves and ensure optimum system performance? Then we have some tips that you should consider when using and installing them. First, valves should be installed as close to the actuator as possible. This placement minimizes pressure drop and maximizes system efficiency while reducing potential leakage.

Another important consideration is the flexibility of the valve's adjustment. If the adjustment screw is fitted with a seal, the setting of the overcenter valve can be adjusted during operation. This feature allows easy adjustment and optimization of valve performance to changing operating conditions without having to shut down the system.

In order for overcenter valves to be used effectively to regulate pressure in hydraulic systems, the required boost pressure must be precisely calculated in advance. The following formula is recommended for this purpose:

In certain applications, overcenter valves can also be used as pipe rupture safety devices. They provide additional protection for the system and prevent the load from sinking uncontrollably if a pipe burst occurs.

ARGO-HYTOS check valves have a wide range of settings for the opening pressure of the pressure relief valve - up to 420 bar (6100 PSI). This offers users the possibility to adapt the valves to their specific requirements and operating conditions.

What are the applications for ARGO-HYTOS overcenter valves?

ARGO-HYTOS overcenter valves are high-quality technical solutions that are ideally suited for various fields of application. They provide precise control and improve the efficiency and safety of hydraulic systems in a wide range of applications.

In cylinder applications, overcenter valves are particularly important to ensure smooth movement and control of the load. In aerial work platforms and wheel loader masts, they provide stable control of the load in one direction or during load direction changes. By providing precise pressure control, they contribute to equipment longevity and operator safety.

Engine applications also benefit from the advantages of overcenter valves. In winches, for example, they enable efficient load control and help reduce energy losses. Their integrated check and pressure relief functions protect against cavitation and keep the system safe from overload and pressure spikes.

Thanks to their sophisticated technology and versatility, overcenter valves can be used in a wide range of industries and systems. There, they increase the efficiency and reliability of hydraulic systems. Using these valves significantly helps to extend the service life of your equipment and minimize maintenance requirements.

Would you like to receive non-binding advice on the advantages and possible applications of our overcenter valves or other valve solutions from our portfolio? Then get in touch with us!